In recent years block paving has become the number one choice for driveways and patios.
As we all know, it looks impressive when first laid but within a short space of time nature takes it’s toll and weeds moss along with oil/diesel deposits diminish the appearance of your expensive investment.
Fortunately we have the answer!
Cleaning Services:
Our truck mounted high pressure wash system works at 1700 psi as opposed to a domestic pressure system that works at around 110 psi.
This powerful machine will remove years of accumulated weeds, moss, dirt and grime.
Our environmentally friendly cleaning chemicals used along with our mechanical wash/vacuum machine will remove the majority of oil and diesel marks and will refresh your block paving, restoring it’s original colour and warmth.
All dirty water is returned to the on-board waste tank and is appropriately disposed of.
Once dry ( usually the following day ) the area is re-sanded using kiln dried block paving sand.
Then we apply the first coat of PICSEAL sealant. This usually dries within 2 hours after which a second coat is applied.
The drive or patio can be walked on within 2 hours of the second coat, however vehicles should be kept off the area for 24 hours in order to allow the sealant to fully harden.
PICSEAL sealant will penetrate the pigment of the block paving to leave a natural matt finish as opposed to many sealants that merely coat the surface with an unnatural ‘shiny’ finish.
The sealant will last for approximately 5 years before any maintenance will be required by ourselves.
The manufacturer has advised us that after sealing the block paving should be hosed and swept 3-4 times a year to maintain it’s appearance.
Should this advice not be followed they estimate an expectancy of around 1-2 years.
Should your block paving require any repairs we can highly recommend a professional block paving installer.
Other Paving:
Our system can also be used to clean and seal crazy paving, textured paving, paving slabs etc.,


